How To Perform Canon Imageclass D570 First Time Printer Setup?

In this section we will explain about how to configure Canon Imageclass D570 First Time Printer Setup. The three-in-one printer --- Canon imageCLASS D570 --- uses laser technology to deliver fast and high-quality printouts. This printer comes with Wireless Ready and Mobile printing connectivity features. It offers many cool features, and some of them are listed below.

Printer functions: Print, scan, and copy
Scan optical resolution is up to 600 x 600 dpi
Scan element used: CIS
Maximum printing speed: 16 ppm & 28 ppm
Connectivity: Wireless, LAN, and USB
AirPrint enabled

The following step-by-step instructions explain how to perform the Canon imageCLASS D570 printer setup for the first time.

Canon Imageclass D570 First Time Printer Setup

Step 1: Unpack the product box

If you’re going to set up a new Canon printer, then you have to begin with unpacking. Follow the quick instructions given below to perform the same. If you have already unpacked the printer, then skip steps 1 & 2 and continue from step 3.

Open your Canon printer box.

Inside the box, check whether the following printer components are provided: a power cord, setup CD, a cartridge (pre-installed), and a user guide.

Place the printer and its components on a clean surface and continue the setup process as mentioned below.

Step 2: Unpack the printer

Place the printer on a table or on a surface where you can use it comfortably.
Now, remove the packing materials present outside the printer.
After removing them, raise the scanner unit and remove the cartridge from the printer.
Unpack the cartridge completely and place it back into the printer.
Lower the scanner unit.

Continue reading the below steps to know more on how to configure Canon Imageclass D570 First Time Printer Setup.

Step 3: Loading paper

Pull out your Canon printer’s paper cassette.
Move the width guides to the ends.
Load a stack of A4 or U.S paper in the cassette.
Now, align the width guides based on the paper type that you have loaded.
Push in the cassette towards the printer. Make sure that the output tray is opened.

Step 4: Turn on the printer

Get your Canon printer’s power cord.
Plug the power cord into your printer and the other end of the cord into an electrical outlet.
Locate and press the ON button on your printer’s control panel.
Now, your printer will start to turn on.
Once it becomes stable, continue the next step of the Canon imageCLASS D570 printer setup.

Step 5: Configuring the printer settings

Initially, choose the desired language from the suggested list.
Similarly, set other settings by following the on-screen instructions.
When prompted, choose the Connection type of your desire.
For Wired LAN: Using an Ethernet cable, connect your Canon printer to your network device.

For USB: Connect your computer and the printer together using the USB cable.
For Wireless: Choose your wireless network when prompted and type its password in the given field.
Finally, install the Canon imageCLASS printer driver on your computer to finish the printer setup.