HOW TO CONFIGURE CANON PIXMA MG2920 WIRELESS SETUP?

This article will help you in completing the Canon Pixma MG2920 wireless setup. Our step-by-step instructions are easy to understand and implement. So, follow the instructions in the given order.Before you connect your printer to your network and computer, make sure you completely remove all the packing materials from the printer. Next, plug your printer into the power socket, load paper, and install the cartridges. Ensure you install only the original cartridges to avoid print quality issues. Also, make sure you have loaded only the printer-supported paper.Points to remember:

Canon Pixma MG2920 Wireless Setup
  • Make sure your Canon printer and computer are placed within the wireless network range.
  • Check if your internet is stable.
  • Do not place any objects near your printer, e.g., micro-wave oven.
  • Connect your devices (computer and printer) to the same wireless network.

Note: Download the printer driver from the official Canon site if you don't have the CD-ROM supplied with the printer.

CANON PIXMA MG2920 – WIRELESS SETUP

Canon Pixma Mg2920 Printer Wireless Setup
  • Turn on your printer.
  • Now, press the Wireless button on your Canon printer until it starts flashing.
  • Insert the installation CD-ROM into the CD drive of your computer and run the setup file.
  • If you don't have the CD-ROM, follow the below steps to download the driver from the Canon site.
  • Visit Canon's official page.
  • Click Support --> Software & Drivers.
  • Enter your printer's name and select your device from the suggestions.
  • Scroll down to find the Drivers & Downloads tab and click on it.
  • Choose your operating system and language.
  • Now, a list of drivers can be seen under the Drivers & Downloads section.
  • Click Select --> Download.
  • Your driver download should start immediately.
  • Once downloaded, run the driver setup file.
  • Now, wait for the file to be extracted.
  • Click Next on the initial installation screen.
  • Select the Wireless LAN Connection radio button and click Next.
  • Next, choose Access Point Connection.
  • Click Next.
  • Check if your printer is turned on and click Next.
Canon Pixma Mg2920 Wireless Network Setup
  • Now, you will find a list of printers connected to your network, if any. Choose your printer and select Next to continue Canon Pixma MG2920 Wireless setup process.
  • Now, the Setup Guide installation begins.
  • Once done, click Next.
  • Choose Cableless setup.
  • Follow the on-screen instructions.
  • When you see the Connection completed message, click Next.
  • Choose the software you wish to install on your computer. This software is optional.
  • After selecting the software, click Next.
  • Read through the License Agreement carefully and then click Yes to accept the terms and conditions in it.
  • If you see the Firewall or antivirus screen, choose Next.
  • Wait patiently for the installation process to get over.
  • If your printer is detected, you will see the Setup has been completed message. Click Complete.
  • When you see the Print Head Alignment window, get back to your printer and load some paper into the input tray.
  • Click Execute on the computer.
  • The Print Head Alignment process starts.
  • Click Next.
  • Again, click Next on the User Registration screen.
  • On the Extended Survey Program screen, choose Agree or Do not agree.
  • If you are prompted to test print, load paper into the printer and click the Execute button.
  • After printing the test page, click Next.
  • Click Exit when the installation is completed.
Canon Pixma Mg2920 Printer WiFi Setup

Get complete tech support for the Canon Pixma MG2920 wireless setup process by clicking the "Click To Call" button provided on this web page.

Related Queries