canon pixma printhead replacement

Remove the Printhead:

  • Power up your Canon PIXMA printer and then open the paper output tray. Raise the document cover.
  • Do not touch any of the buttons that are present on the printer’s control panel.
  • Once you open the ink cover, the printhead holder will slide to the access area.
  • Initially, remove all the cartridges one by one out of the holder for the Canon Pixma printhead replacement process.
  • Long-press the Stop button until the carriage moves to the replacement area.
  • Lift the inner cover and then pull the carriage tray out. Hold the top of the middle tab and then pull the printhead out.

Replace the Printhead:

  • Take the new printhead out of its packing. A center tab will be present on the printhead, hold it.
  • With the front area of the printhead facing downwards, place the replacement printhead into your Canon PIXMA printer.
  • After inserting the printhead into its holder, move the Head Seat Holder towards the rear of your Canon PIXMA printer.
  • Close the inner cover and then fix the ink cartridges into the appropriate slots. Lower the inner cover and then the document cover. To know more about Canon Pixma printhead replacement process, contact our tech experts.


  • You can know whether a Canon printhead error occurred by the flashing of the Alarm light.
  • If the Power/Alarm light flashes 11 times continuously, then it is time to troubleshoot the printhead error.
  • Raise the Canon printer cover and wait until the carriage halts.
  • Remove the ink tanks one by one carefully.
  • Unlock the printhead with the blue lever and fix it back.
  • Reinstall all the ink tanks back into its position and close the printer cover.
  • Restart the printer and print a sample.
  • Check if the print quality is good. For that, you need to press the Cancel button and hold it for a few seconds.
  • When the alarm lamp flashes twice, release the Cancel button.
  • Print a test page to verify the print quality.
  • If the issue hasn’t resolved, then you need to perform deep printhead cleaning or do Canon Pixma printhead replacement process.

how to Clean The Heads On My Canon Pixma Printer?

You can clean the Printhead of your printer from your computer. Follow the below steps to know how to clean the heads on my Canon Pixma printer.

  • On your computer, open the printer driver and go to the Set Up window.
  • Tap the Maintenance tab and click the Cleaning option.
  • Choose the ink cartridge you want to clean in the Print head Cleaning dialog box.
  • Before cleaning, check the items you need by clicking the Initial Check Items option.
  • Turn on your Canon printer and click the Execute option in the printer driver setup window.
  • Now the cleaning process begins. Once the cleaning process is complete, a confirmation message appears on the screen.
  • To check the print head quality, click the Print Check Pattern option.
  • If you attempt to clean the cartridge for more than two times and the issue continues, then perform deep cleaning or start the Canon Pixma printhead replacement process.
  • Click the Deep Cleaning option on the Maintenances tab.
  • Wait for the cleaning process to complete. If the issue persists, then replace the print head with a new one.
  • You can also clean the print head manually by following the instructions given below.
  • Get a lint-free cloth to clean the print head.
  • Take the print head out of the printer.
  • Dip the lint-free cloth into the water and wipe the print head.
  • Handle the print head carefully.
  • After cleaning the print head, replace it in the printer.


  • Refer to the following steps to resolve this error.
  • Check if the Canon printer is turned on to fix the Canon printer deep cleaning not working issue.
  • Place enough paper in the input tray. Gently lift the Paper Support and place it back in its position.
  • Also, open the output tray and its extension before performing the cleaning process.
  • Now, print the Printhead Alignment page. To do so, go to the Maintenance option and press it repeatedly until the letter U displays on the screen.
  • Once it is printed, place it on the scanner glass and scan it in order to adjust the printhead.
  • If the letter does not appear, make a copy of the printhead alignment page to align them.
  • Get in touch with our technical experts if the above steps do not work & get simple guide for Canon Pixma printhead replacement process.
Canon Pixma Printhead Replacement

printhead cleaning kit for canon printers

  • Before starting the cleaning process, power off the printer and unplug the power cord.
  • Unplug all the cables from the printer.
  • For the cleaning process, you will need a printhead cleaning kit for Canon printers. It includes syringe, 17 oz printhead cleaning fluid, connector tubing, one pair of Nitrile powder-free gloves, and some Kitchen papers.
  • Remove all the cartridges from the printer. Place some kitchen papers under the print head to absorb the fluid discharge.
  • Push the connecting tube into the smallest hole of the syringe and to the affected print head.
  • Inject the cleaning solution into the affected nozzles without any airlock. Leave the printhead for 5-10 minutes depending on the extent of the blockage.
  • Inject another 1 ml immediately and replace the cartridge.
  • After a few minutes, remove the kitchen paper under the print head which has absorbed the discharged fluid.
  • Repeat the above explained steps for the rest of the cartridges without any airlocks and change the kitchen towel after each process.
  • Once the cleaning process is complete, remove all the blotting paper and fix all the ink cartridges.
  • Replug the cables and power on the printer.
  • Print a test page to verify whether the cleaning process is successful. Reach our tech experts to get complete support for Canon pixma printhead replacement process.

Related Queries