CANON PRINTER ERROR CODE 1003
At times, error codes pop up when there is an issue in the ongoing process. However, every error code can be fixed when you diagnose the cause correctly. If you encounter the error code 1003 on your Canon printer, you can fix the issue by trying out the basic troubleshooting techniques. This article gives you the best solutions to fix the Canon printer error code 1003. Try out all of them and fix your printer.
The error code 1003 occurs on Canon printers when there is an issue with the paper feeding. It might also occur when there is a paper jam. When you fix these problems, you can efficiently get rid of the error code 1003.
Fix paper jam
- When there is a paper jam on your Canon printer, it will show you the error code 1003. In those cases, locate the paper jam area and take out all the jammed paper carefully. Once you have taken out all the jammed paper, check whether the error code has disappeared.
- If you still cannot resolve the issue, proceed with the following method.
Power cycle your printer
- A simple power cycle can help your printer perform better. To do so, turn off your Canon printer and disconnect its power cable. Leave your printer disconnected for a minute. Then, reconnect the power cord to your Canon printer and turn it on.
- Now, check whether the error code is fixed.
Fix paper feeding issue
- When your printer fails to feed the loaded paper, you will end up with the error code 1003. So, check whether you have loaded enough paper into the paper tray.
- If you have loaded paper above the indicated limit, you may encounter a paper jam on your printer. At the same time, when you load one or two pieces of paper into the paper tray, probably your printer may fail to feed the paper, and as a result, you will end up with the error code 1003. Therefore, always load a stack of paper without exceeding the limit.
- If the paper you have loaded is damp or wrinkled, you may face paper feeding issues, and that will lead to the error code 1003. So, load a fresh stack of paper into the paper tray and check whether the error code has been resolved.
- Check the width guides. If you have tightened the guides too much, it will become a tough process for the printer to feed the loaded sheets, and it will fail to feed the paper. In such cases, adjust the width guides against the paper but not too tightly.