Canon Printer Error Code E3
Error codes are inevitable on every printer, and the Canon printer is not an exception. However, every error code occurs for a reason, and when you figure out the cause behind the problem, you can fix it like an expert.
The error code E3 occurs on your Canon printer when the paper is jammed in the paper output slot, at the transport unit, inside the printer, or at the back of the printer. Check for the jammed paper in all these locations and remove the jammed paper carefully. This article will guide you through the procedure for removing the jammed paper from all these locations.
Get Rid Of The Jammed Paper From The Paper Output Slot
- If there is a jammed paper at the paper output slot, pull out the paper carefully. If you see the jammed paper at the front tray, do not pull the sheets; if you do so, it can cause damage to the printer.
- In case you cannot pull the paper from the output slot, turn off the printer and turn it on. This ejects the paper automatically.
- Once you remove all the jammed paper, reload the paper and press the Stop/Reset button on the printer.
Remove All The Jammed Paper From The Transport Unit
- If you see the jammed paper on the front tray, you should remove it from the transport unit. To do it, turn off the printer and unplug the power cord. Stand the printer upright with the right side facing down.
- Open the transport unit by pushing the open lever. Then, take out all the jammed paper carefully.
- Finally, close the transport unit. Then plug the power cord into your printer and reload the paper.
Remove The Jammed Paper Inside The Machine
- In case you cannot remove the jammed paper from the paper output tray or transport unit, you have to remove it from the inside of your printer.
- Turn off your printer and disconnect the power cord from the power supply.
- Open the paper output tray and remove all the sheets from the front tray. Now, see if there is jammed paper under the cartridge holder; if so, remove the sheets carefully. In case the paper is rolled up, pull it out. Once you remove all the jammed paper under the cartridge holder and inside the printer, close the paper output cover and reload the sheets.
Remove The Jammed Paper At The Back Of Your Printer
- While performing automatic duplex printing, the paper may jam at the back of your printer. In this case, you have to remove all the jammed paper to resolve the E3 error code.
- Pull out the paper from the output slot. Turn off your printer and disconnect the power cord from the printer’s power port and the electrical outlet.
- Push the open lever and open the transport unit. Then, remove all the jammed paper from the back of the printer.
- Now, reconnect the power cord to the appropriate ports and reload the paper.
How To Prevent Paper Jams?
- Always load the paper suited for printing. It is recommended not to use A5-sized paper; it may curl and cause paper jams.
- Do not load sheets beyond the indicated limit.
- Do not load curled or damp paper.
- Always adjust the guides firmly against the paper but not too tightly.
- These measures can help you prevent paper jams to some extent.
This is how you should fix the error code E3 on your Canon printer. For further questions and clarifications, get in touch with our expert team. You can utilize the call option provided on this page for the same.