Canon Selphy CP1300 Won't Connect To Wifi

Canon SELPHY CP1300 is a photo printer that is easily portable and can be accessed from any location in your workplace. This printer supports wireless connectivity and so you can connect any wireless device to it. If your Canon Selphy CP1300 Won't Connect To Wifi, keep reading the steps below to troubleshoot the wireless network issue.

Canon Selphy CP1300 Won't Connect To Wifi
  • First, verify that you have placed the printer close to your Wi-Fi router. If not so, move the printer closer to reduce Wi-Fi interference.
  • Remove any wireless devices such as microwave ovens, Bluetooth devices, or other devices operating on the 2.4GHz bandwidth.
  • If necessary, restart your printer and reconnect it to your router.
  • Make sure to enter the correct wireless network settings such as SSID and network key while configuring your printer over the wireless network.
  • You can identify the wireless network settings from your router's label.
  • In case you have misconfigured the wireless settings, your Canon SELPHY CP1300 won't connect to Wi-Fi.
  • To avoid these conflicts, you can also use the WPS Push Button method to connect your printer over the wireless network.
  • To begin with, fix the loaded paper cassette and ink cassette into the printer.
  • Go to the printer's control panel and tap the Home button.
  • Use the navigation keys on the touchscreen panel to select Wi-Fi Settings.
  • Tap the OK button and select the Connection Method Via Wi-Fi Network option below Wi-Fi settings.
  • Select the WPS Connection option and tap the OK button.
  • Choose the PBC Method option using the navigation keys and tap the OK button.
  • When the printer displays the Push and hold the access point button, then proceed message, press and hold down the WPS Push button on your router for a few seconds.
  • In case your printer fails to connect to your wireless router, press the Home button and select Wi-Fi settings.
  • Press the OK button and select the Reset Settings option.
  • When the Reset all wireless communication settings to default? message appears, press the OK button to confirm your action.
  • The pre-configured wireless settings will be restored to factory defaults.
  • Now, reconnect your printer to the wireless network.
  • If still your Canon SELPHY CP1300 Won't Connect To Wi-Fi network, contact our technical experts to assist you in resolving it.

Related Queries